BIOS
The MinnowBoard MAX uses a UEFI system level firmware, and provides both the UEFI shell, and a typical BIOS style menu interface. Elinux Minnowboard MAX BIOS
Supported Firmware
UEFI
Coreboot
SageBIOS
U-Boot
WinZent
UEFI
UEFI devleopment on MinnowBoard covers firmware, pre-OS applications, drivers, and OS loaders. MinnowBoard allows development of low-level features on Intel® architecture in an open source environment.
Intel® Architecture Firmware Resource Center - Minnowboard MAX
UEFI Configuration Example
Taken from http://elinux.org/Minnowboard:MaxBios#BIOS_menu
Reboot your board and keep pressing F2 until you get into the BIOS menu, make sure the below configurations are set
Last updated